|
A wide selection of lampholders in various finishes
Hover over small image to see more detail, select finish from the drop down box; then add to shopping basket
|
ES Lampholder plain with cord grip
Dimensions: w=38mm, h=57mm
Select finish from the drop down box for further details; then select add to shopping basket
|
Porcelain Lampholders
Select connector from the drop down box for further details; then select add to shopping basket
|
SES candle lampholder - plated steel with 2 shade rings and a 10mm entry not available in aged finish
Dimensions: w=43mm, h=55mm
Select finish from the drop down box for further details; then select add to shopping basket |
Large E27/ES pull chain lampholder - only available in brass and chrome plate both with 10mm entry
Dimensions: w=60mm, h=81mm
Select size from the drop down box for further details; then select add to shopping basket
|
Lamp holder. Bayonet fitting with shade rings
Dimensions: w=32mm, h=44mm
Select finish from the drop down box for further details; then select add to shopping basket
|
Cord grip bulb holder with shade rings. This takes a Bayonet Cap bulb
Dimensions: w=32mm, h=57mm
Select finish from the drop down box for further details; then select add to shopping basket
|
Push bar BC internally earthed bulb holder
Dimensions: w=32mm, h=60mm
Select finish from the drop down box for further details; then select add to shopping basket
|
Bulb holder with hook
Dimensions: w=32mm, h=73mm
Select finish from the drop down box for further details; then select add to shopping basket |
Batten lampholder. Takes a BC bulb. Sometimes used in theatre or make up mirrors
Dimensions: w=52mm, h=38mm
Select finish from the drop down box for further details; then select add to shopping basket |
Lampholder. Bayonet fitting no shade rings
Dimensions: w=32mm, h=45mm
Select finish from the drop down box for further details; then select add to shopping basket |
Side entry lampholder with ½" male thread at base entry
Dimensions: w=32mm, h=80mm
Select finish from the drop down box for further details; then select add to shopping basket |
Edison screw lampholder with 2 shade rings
Dimensions: w=47mm, h=60mm
Select finish from the drop down box for further details; then select add to shopping basket |
ES cord grip lampholder with 2 shade rings
Dimensions: w=47mm, h=66mm
Select finish from the drop down box for further details; then select add to shopping basket |
ES lampholder with hook and 2 shade rings
Dimensions: w=47mm, h=105mm
Select finish from the drop down box for further details; then select add to shopping basket |
SBC lampholder with two shade rings
Dimensions: w=23mm, h=37mm
Select finish from the drop down box for further details; then select add to shopping basket
|
Small bayonet cap lampholder (no shade rings)
Dimensions: w=23mm, h=37mm
Select finish from the drop down box for further details; then select add to shopping basket |
Cord grip lampholder with no shade rings. This takes a Bayonet Cap bulb
Dimensions: w=32mm, h=57mm
Select finish from the drop down box for further details; then select add to shopping basket
|
Candle lamp holders - Suitable to use with our candle tubes. Base has a 10mm female thread. Takes an SES light bulb
Select length from the drop down box for further details; then select add to shopping basket
|
Adjustable lamp holder. Earthed and suitable to use with card candle tubes between 80mm and 100mm. Base has a 10mm female thread
Dimensions: w=23mm, h=80 to 100mm
Select range from the drop down box for further details; then select add to shopping basket
|
Bakelite candle ses lampholder. 10mm female thread at base.
Dimensions: w=26mm, h=56mm
Select finish from the drop down box for further details; then select add to shopping basket
|
Bakelite ES lampholder (2 parts). 10mm female thread at base. Takes ES bulb.
Dimensions: w=38mm, h=60mm
Select finish from the drop down box for further details; then select add to your shopping basket
|
Plain Edison Screw Lampholder with half inch threaded base. Just add a reducer in your chosen finish to make this 10mm.
Dimensions: w=38mm, h=60mm
Select finish from the drop down box for further details; then select add to your shopping basket
|
