Lampholder Inserts Replacements - ES and BC

Name: Lampholder Inserts
SKU: BB25
Price: 0.8 GBP
Availability: InStock

Lampholder Inserts

£0.80 – £1.90

Replacement lampholder inserts for our lamp holders.

Available sizes: Edison Screw, Bayonet Cap, Small Edison Screw and Small Bayonet Cap.

SKU: BB25 Category: Lamp holders Tags: Bayonet Lamp Holder - B22/BC, Bayonet Light Fittings, Edison screw lamp holders - E27/ES, Edison Screw Light Fittings

Additional information

Additional information

Weight	Choose an option to display
Dimensions	Choose an option to display

You may also like…

Lampholders E27 Bakelite with Shade Rings

£1.80 – £2.40

Select options Details
Lampholders Bayonet Cap with Cord Grip and Shade Rings

£4.30 – £5.60

Select options Details
Lampholders Small Edison Screw Candle Bakelite

£1.80 – £2.00

Select options Details
Lamp holders Edison Screw with Cord Grip and Shade Rings

£10.80 – £19.30

Select options Details

Lampholder FAQ's

Bulb holder types explainedDenise2020-11-05T19:18:27+00:00

Bulb holder types explained

SBC – small bayonet cap fitting takes a SBC bulb. Also known as B15d . Cap measures 15mm across.
BC – bayonet cap fitting takes a BC bulb. Also known as B22d. Cap measures 22mm across.
SES – small edison screw fitting takes a SES bulb. Also known as E14. Cap measures 14mm across.
ES – edison screw fitting takes an ES bulb. Also known as E27. Cap measures 27mm across.
GES – giant edison screw fitting takes a GES bulb. Also known as E40. Cap measures 40mm across.

Can I unlock my ‘locked’ lampholder?Denise2021-03-01T12:14:38+00:00

Can I unlock my ‘locked’ lampholder?

Edison Screw lamp holders have a safety feature that mean once put together they cannot be unscrewed. This is to ensure you do not unscrew the whole lampholder when changing the light bulb. Safety essential, but not ideal if you have put it together and need to unscrew it again. However with a little patience, it IS possible. See our video to see how.

Watch video in new window

Do I need 2 or 3 core lamp flex?Denise2020-12-22T14:53:45+00:00

Do I need 2 or 3 core lamp flex?

When using any metal light fittings you need to earth the fitting to reduce the risk of electric shock. You therefore need to use our 3 core light flex in either our round or twisted braid as both have live, neutral and earth wires. Our 2 core braided flex only has live and neutral wires and therefore is only suitable for use with non-metal light fittings. If in any doubt please always refer to a qualified electrician.

Watch video in new window

How do I wire up an ES lampholder?Denise2020-11-04T15:52:36+00:00

How do I wire up an ES lampholder?

I’m having trouble putting the side entry lamp holder kit together?Denise2020-11-09T16:18:06+00:00

I’m having trouble putting the side entry lamp holder kit together?

Our side entry lamp holder kits are usually put together for you. If not, you just need to switch the reducer round.

Undo the reducer screwed on the top of the bung.
Screw the side entry tube onto the bung where the reducer came off.
Put the reducer on top of the side entry tube ready for your lampholder.

The side entry tube is now the right way up so the flex can be gripped by the black grip screw above the entry hole in the tube.

Which Amp Lighting Flex or Plug can I use?Denise2020-10-05T14:25:18+01:00

Which Amp Lighting Flex or Plug can I use?

The conversion of Watts to Amps is governed by the equation Amps = Watts/Volts so if you check how many Watts your bulb(s) will be, you can work out what amperage flex or switch you will need. For example 4 watts/240 volts = .016 Amps for 1 x 4 Watt bulb.

Our Bayonet Cap Lamp holders are generally 2 AMP rated and our ES lamp holders 4 AMPS. Our Flex specifications can be found here.

We are not qualified electricians and only offer guidance, which can change. If you are not a qualified electrician you should always get any electrical work you do properly checked & certified.

Which LED bulb should I choose?Denise2020-11-04T15:29:24+00:00

Which LED bulb should I choose?

Well it’s now all about the Lumens, not Watts. Previously you chose your bulb brightness by the level of Watts i.e a 40, 60 or 100 watt bulb.
But, wattage is not actually the measure of a bulb’s brightness, but is its energy usage. There is then, a direct correlation between watts and the bulb’s brightness in incandescent bulbs but not with an ultra low consumption of a 4 Watt LED bulb.

LEDs (Light Emitting Diodes) work differently and so is the way we measure the brightness. As LEDs use far less energy, the amount of watts used is no longer an indicator as to the brightness of the bulb.

Also there is no exact conversion from Watts to LEDs; a traditional 60 watt incandescent bulb can compare to anywhere between 2 and 12 watts in a LED bulb, but don’t panic, it’s just a case of knowing your required Lumen rating. Lumens are the ‘brightness’ measurement provided by a light bulb, and this is what you need to look for when choosing your new LED.

Our comparison guide is an approximation of Watts to Lumens for our bulbs only. An old 40 watt bulb would on average be between 300 to 500 Lumens.

So, now we know where previously we looked at a 40 watt incandescent bulb we may now choose perhaps a 4 watt LED, we may also want to choose our bulb based on the colour emitted. This is referred to as ‘colour temperature’ and is measured in Kelvins – with the higher the number, the whiter and cooler the light given off i.e. anything under 4000K tends to produce a warmer, more gentle light and anything over that produces a cooler brighter white light, mostly used for task areas such as kitchens and work areas.
The average of an old style incandescent was between 2,700 and 3,500 Kelvin. So if colour rendering is your deciding factor then choose your LED bulb by its Kelvin rating.

Which wattage bulb can I use with your lamp holders?Denise2019-05-13T11:49:40+01:00

Which wattage bulb can I use with your lamp holders?

Our BC and SBC range of lampholders are both 2 amp rated so you can use a bulb up to 60W.
Our ES are higher amp rated at 4 amps so you can use a bulb of up to 100W. Most LED bulbs are now only a few Watts.
Please see our Light Bulbs FAQs for more details and help in choosing the right LED bulb.

The other consideration when choosing a bulb is what shade will be used. Generally the shade should have the same wattage rating as the bulb. So whilst you can rate the lamp holder this could change with the use of a fabric or paper shade and caution should be taken and advice taken from a qualified electrician.

Lampholder Inserts

Lampholder Inserts

Additional information

You may also like…

Lampholders E27 Bakelite with Shade Rings

Lampholders Bayonet Cap with Cord Grip and Shade Rings

Lampholders Small Edison Screw Candle Bakelite

Lamp holders Edison Screw with Cord Grip and Shade Rings

Lampholder Bayonet Cap Switched with Shade Rings

Lamp holders Edison Screw/E27 Bakelite

Lamp holders Edison Screw with Shade Rings

Batten Lampholders – BC/Bayonet Cap

Bulb holder types explained

Can I unlock my ‘locked’ lampholder?

Do I need 2 or 3 core lamp flex?

How do I wire up an ES lampholder?

I’m having trouble putting the side entry lamp holder kit together?

Which Amp Lighting Flex or Plug can I use?

Which LED bulb should I choose?

Which wattage bulb can I use with your lamp holders?

Bulb and Bulbholder Type
Material
	Clear selection

Lampholder Inserts

Additional information

You may also like…

Related products