|
Wide selection of lighting hardware parts and components. Most available in chrome, brass or antique brass finish.
Hover over small image to see more detail, select finish from the drop down box; then add to shopping basket |
Base plate. These can be used to attach a lamp holder with a half inch entry to a wooden table lamp base or standard lamp. See our table lamp guide for further details
Dimensions: w=25mm, h=9mm.
Select finish from drop down box; then just add to your shopping basket. |
Reducer ½" to 10mm. This can be used with any of our ½” entry lampholders to make a 10mm entry lampholder.
Dimensions: w=15mm, h=8mm
Select finish from drop down box; then just add to your shopping basket. |
Plastic grommet for a cable hole on a table lamp base.
Select colour from drop down box; then just add to your shopping basket. |
Plastic cord grip. This can be used with French rise and fall gallery GYbrass05. 10mm male thread at one end remove cap place flex in central hole return cap and tighten round light flex
Dimensions: w=19mm, h=30mm
Select colour from the drop down box for further details; then select and add to shopping basket. |
| |
Plastic 3 pin, 3 amp Plug
Dimensions: w=51mm, h=45mm
Select colour from drop down box; then just add to your shopping basket. |
Solid brass hexagonal nut
Dimensions: w=10mm or 1/2"
Select size from drop down box; then just add to your shopping basket. |
Allthread - 10mm hollow. This can be used in a 10mm lamp holder to adjust the height of the lampholder.
Dimensions: w=10mm, h=38mm
Select size from the drop down box for further details; then select and add to shopping basket. |
Reducer ½" to 10mm. This can be used with any of our ½” entry lampholders to make entry 10mm.
Dimensions: w=14mm, h=7mm
Select finish from drop down box; then just add to your shopping basket. |
Brass ½" all thread . This hollow threaded tube can be used with our ½” entry lampholders to attach to a collar or ½” female thread.
Dimensions: w= 13mm, h=13mm
Select size from drop down box; then just add to your shopping basket. |
Ceiling Plate with ½” threaded hole. This has two screw holes and comes with two matching screws.
Dimensions: w=25mm, h=9mm
Select colour from drop down box; then just add to your shopping basket. |
Solid metal plate with 10mm unthreaded central hole
Dimensions: w=25mm, h=9mm
Select colour from drop down box; then just add to your shopping basket. |
Clinch these can be used to join a lamp holder to a ceramic table lamp base. See our table lamp guide for further details
Dimensions: w=28mm, h=27mm (rubber bung - 20mm)
Select finish from the drop down box for further details; then select and add to shopping basket. |
Coupler ½” to ½” - internally threaded
Dimensions: w=14mm, h=19mm
Select finish from drop down box; then just add to your shopping basket. |
Reduction Bush reduces from ½” to 10mm - internally threaded
Dimensions: w=18mm, h=12mm
Select finish from drop down box; then just add to your shopping basket. |
4" metal hollow tube with ½” threads at both ends. The thread is quarter inch deep and fits neatly into our half inch entry lampholders
Dimensions: w=14mm, h=96mm
Select finish from drop down box; then just add to your shopping basket. |
8" metal hollow tube with ½” threads at both ends. The thread is quarter inch deep and fits neatly into our half inch entry lampholders
Dimensions: w=14mm, h=204mm
Select finish from the drop down box for further details; then select add to shopping basket. |
Hook male solid metal with a ½” external diameter thread and central hole for flex to run though
Dimensions: w=30mm, h=40mm
Select finish from drop down box; then just add to your shopping basket. |
Male solid metal hook with a 10mm external diameter thread and central hole for flex to run though
Dimensions: w=30mm, h=40mm
Select finish from drop down box; then just add to your shopping basket. |
Female Hook with ½” internal thread and central hole for flex to run though
Dimensions: w=30mm, h=40mm
Select finish from the drop down box for further details; then select and add to shopping basket.
|
Lamp side entry tube with 10mm female thread and 10mm male thread and grommet for flex to come out the side
Dimensions: w=12mm, h=36mm
Select finish from drop down box; then just add to your shopping basket. |
3 pole connector terminal block
Dimensions: w=26mm, h=17mm
Select from drop down box; then just add to your shopping basket. |
Brass Loop with 10mm female thread
Dimensions: w=15mm, h=30mm
Select from drop down box; then just add to your shopping basket. |
Metal Cord grip with half inch male thread. Simply undo the cap put flex through black plastic central hole return cap and tighten to grip flex
Dimensions: w=18mm, h=30mm
Select finish from drop down box; then just add to your shopping basket. |
Lampshade reducing ring. This reduces the central hole in your lampshade from Edison screw size (45mm) to bayonet cap size (29mm).
Dimensions: w=60mm, h=5mm
Select colour from drop down box; then just add to your shopping basket.
|
Steel hollow allthread. This has to be sent by courier due to length -1 metre so P&P is £7.99.
Dimensions: w=1/2" or 10mm
Select size from drop down box; then just add to your shopping basket. |
Felt protective circle. Used to protect wood or glass furniture from a lamp base.
Dimensions: w=230mm
Select colour from drop down box; then just add to your shopping basket. |
Ceiling plate with ½” threaded entry hole
Dimensions: w= 65mm, h=20mm
Select finish from the drop down box for further details; then select and add to shopping basket. |
Base plate 1" diameter with 10mm thread. These can be used to attach a lamp holder with a 10mm entry to a wooden table lamp base or standard lamp. See our table lamp guide for further details; then select add to shopping basket
Dimensions: w=25mm, h=9mm.
Select finish from drop down box; then just add to your shopping basket. |
Lamp Shade retaining ring. Suitable for a B22/Bayonet Cap size lampholder
Dimensions: w=31mm, h=4mm
Select finish from drop down box; then just add to your shopping basket. |
Lamp shade ring. Suitable for a E27/Edison Screw size lampholder
Dimensions: w=48mm, h=3mm
Select finish from drop down box; then just add to your shopping basket. |
Reduction bush reduces from 13mm female to 10mm male
Dimensions: w=15mm, h=15mm
Select finish from drop down box; then just add to your shopping basket. |
Knuckle joint for wall light or ceiling light bracket with half inch male and female threads in brass and chrome; and a new line in aged brass with half inch male threads
Dimensions: w=15mm, h=45mm
Select finish from drop down box; then just add to your shopping basket. |
