Click on images to be taken to relevant shop page for more details of an item. Select finish and add to basket to buy the items selected. You can edit your purchases in the shopping basket to make variations on your selections.

Ceramic table lamp kit

Select finish Please select... brass aged brass chrome and click to add to your basket

You can use our table lamp clinch, a reducer and a lampholder to re wire a ceramic table lamp that has an exit hole in it for flex. The brown metal washer is pressed onto the black base of the clinch before putting it inside the ceramic lamp base with the rubber washer for protection. Then screw the reducer onto the top of the clinch which has been fed through the top hole, then screw on the lampholder. Then just select your flex and plug. We stock these in brass, aged brass and chrome finishes.

Wooden table lamp kit

These base plates can be screwed into your wooden table light or standard lamp. Then screw on the switched lampholder and choose some flex and a plug. This is suitable for bases with an exit hole for the flex.

Side entry lampholder kit (for ceramic base or bottle)

Select finish Please select... brass aged brass chrome and click to add to your basket

These side entry lampholders can be used for a ceramic table lamp base or bottle that does not have an exit hole for the flex.

Side entry lampholder kit (for wooden lamp with no flex hole)

Select finish Please select... brass aged brass chrome and click to add to your basket

This side entry lampholder can be used on a wooden table or standard lamp base with no flex entry hole.

Raised table lamp holder 8 "

Select finish Please select... brass aged brass chrome and click to add to your basket

If you want to raise any of the above lampholders higher by 8" just add the above 2 items

Raised table lamp holder 4 "

Select finish Please select... brass aged brass chrome and click to add to your basket

If you want to raise any of the above lampholders higher by 4 " just add the above 2 items