Brass wall light Archives - Lamps and Lights

Wall Light with Swan neck Edison Screw

£27.30 – £40.70

Select options Details
Wall Light Large Swan Neck ES Lampholder

£31.80 – £40.20

Select options Details
Double Wall Light with Edison Screw Lampholders

£61.00 – £74.50

Select options Details
Wall Light Swan Neck with Bayonet Cap Lampholder

£18.70 – £30.50

Select options Details
Wall Light Large Swan Neck with Bayonet Cap Lampholder

£22.50 – £30.10

Select options Details
Double Wall Light with Bayonet Cap Lampholders

£38.00 – £54.20

Select options Details
Sale!

S arm wall light in chrome

£41.00 – £63.00

Select options Details

Wall Light Kits FAQ

Do I need 2 or 3 core lamp flex?Denise2021-07-27T10:24:44+01:00

Do I need 2 or 3 core lamp flex?

When using any metal light fittings you need to earth the fitting to reduce the risk of electric shock. You therefore need to use our 3 core light flex in either our round or twisted braid as both have live, neutral and earth wires. Our 2 core braided flex only has live and neutral wires and therefore is only suitable for use with non-metal light fittings. If in any doubt please always refer to a qualified electrician.

Watch video in new window

Do you provide any Electrical or Restoration Services?Denise2021-08-06T14:44:05+01:00

Do you provide any Electrical or Restoration Services?

We do not undertake the restoration or wiring up of our products. We sell components individually not fitted together. Once we put them together we would have to send them off to be PAT tested. You can buy the components and get an electrician to put them together and PAT test them for you?

Need an Electrician to put our products together? You can find one in your area here NICEIC or here ECA
Need a Restorer? You can find one here BAFRA

How to wire up lampholders?Denise2021-04-28T14:37:55+01:00

How to wire up lampholders?

The earth is marked in the middle of the insert. The live is the one that from underneath you can see goes across to the centre of the insert.

We also have a list of useful “How to” videos on our YouTube channel that includes a video “Metal Bayonet Lampholder Wiring & Testing” where you can see our bayonet cap lamp holder being wired up and tested by an Electrician.

Please do check your work with an electrician though as this advice is strictly general & can vary depending on many factors relating to the individual use of a product and your domestic set up.

Is the wood you use from a sustainable FSC source?Denise2021-06-08T15:51:00+01:00

Is the wood you use from a sustainable FSC source?

Yes our wood is supplied from a sustainable FSC source. Certification is available below.

FSC Certificate

What size are your small, medium & large shades?Denise2020-10-22T14:39:31+01:00

What size are your small, medium & large shades?

Extra small less than 120mm wide

Small 120-150mm wide

Medium 160-210mm wide

Large 220-290mm wide

Extra Large 300-340mm

X extra large 350mm+

Which regulations apply and bathroom lighting?Denise2021-05-14T16:42:27+01:00

Which regulations apply and bathroom lighting?

Are you qualified? Installing our lighting is not difficult if you are competent, but carried out incorrectly can prove dangerous. Electrical work is a skilled profession requiring expert knowledge with ever changing accreditation therefore electrical contractors are required to regularly update their qualifications. We strongly advise you instruct a fully qualified NICEIC registered electrician. As a supplier we are not qualified or insured to advise you on how to wire up your lighting schemes so any advice given is of a purely general nature. Please be aware that when selling a home you may need to provide certification for any electrical work undertaken.
Can I use your products in my Bathroom? IP rated lighting must be used in bathroom areas where water is likely i.e. zones 1 and 2. Un-zoned areas can use standard lighting without an IP rating, See our handy diagram for more help. Bathroom Zones Explained

Which wire is which on the clear lighting cable?Denise2020-10-22T14:40:12+01:00

Which wire is which on the clear lighting cable?

To enable the ‘clear look’ to our clear flex, the individual wires are not coloured. Therefore you will need a voltage tester to establish which of the wires are live and neutral. Please always consult a qualified electrician if in any doubt as to the safe use of our products in your project.