Whatever the bottle, we’ve got a bung for it!

champagne-gardenCorks are still a poppin’

This year’s amazing Summer continues with some lovely sunny September days, gardens are still donning the parasols and deckchairs and the aroma of barbecues is still wafting in the air.

So here’s a top tip for you:
When you’ve finished your barbie, don’t throw away your bottl
es because no matter what your tipple, you can be creative, just take a look at what you can do with your empties…

Our expandable bungs can fit any size bottle neck, with a choice of 8 sizes and three finishes. Our lamp bungs have a screw slot so, as you turn the screw, it expands to be the perfect fit for your bottle neck creating that perfect snug fit for your lamp holder. Choose your lampholder, earthed light flex and in line switch and you are well on your way to creating your own unique lamp.

Small bottle bungs

Small bottle bungs

Our three smaller sized bungs have a small decorative cap; perfect for making a lamp from a classic wine or champagne bottle, just add one of our side-entry lampholders for your flex access if you don’t want to drill a hole in the bottle.


Large bottle bungs

Large bottle bungs

Or try one of our larger bungs if you are making a table lamp from a Vase, Demijohn, Milk churn, Trumpet – we’ve seen them all!

You can check tour bungs out on our website using this link Shop Bungs!


andy dane gin bottle lamp

Lamps and Light’s customer, Andy from Andy Dane Photography did just that and here’s his photo to prove it … thank you for sharing it with us Andy!!!

So whatever your tipple and whatever the size of your bottle, we’ve got a bung for it! 




Some more of our customers lovely creations


Share This

16 thoughts on “Whatever the bottle, we’ve got a bung for it!

  1. I wish to convert a whisky bottle into a lamp.
    Require in line chord as drilling through bottom of bottle. Prefer in line switch.
    Bottle neck width 17mm

    • Dear Stephen, We have lots of useful information on Table lamps on this page of the website.
      Then simply use this page of the website to select what you need. Please do call if you need any more help.

  2. Pingback: Happy English Wine Week! - Lamps and Lights Blog

  3. My wife has a ceramic figurine with a tall hollow structure which we have seen with a ‘plastic’ lamp-holder attached. The structure is pre drilled to accept a cable. The diameter of the opening is 10mm Do you have a bung that will fit this size please?
    Many thanks

  4. Pingback: Brand NEW fresh look website | Lamps and Lights Blog

Leave a Reply

Your email address will not be published. Required fields are marked *