|
|
| Roll your cursor over the thumbnail images for further details |
| |
|
|
Shade Carriers Gimbles & Springs |
|
 |
|
|
Restoration of table lamps involves the shade, a small selection of which we have on our light shades page , and the shade carrier. |
|
|
 |
|
New 15cm brass shade carrier used to carry a
glass shade with a 25mm top opening onto a table lamp. To use, unscrew the top filial, place your glass shade on the
frame and replace the finial to secure it. Attach to the base using your lamp holder shade ring. Solid brass top fitting; brass plated steel frame.
Dimensions:h=150mm excl. finial, 195mm inc. finial; max w=108mm.
Price: £9.95 each
Ref: SCbrass03
Click image to add to shopping basket
|
New 11cm brass gimble used to carry a glass shade with a 25mm top opening onto a table lamp. Also sometimes known as a gimble or gimbal. Solid brass top fitting; brass plated steel frame.
Dimensions: h=110mm excl. finial,
145mm inc. finial; max w=80mm.
Price: £6.95 each
Ref: SCbrass01
Click image to add to shopping basket
|
New 16cm chrome light shade holder used to carry a glass shade with a 25mm top opening onto a table lamp. To use, unscrew the top filial, place your glass shade on the frame and replace the finial to secure it. Attach to the base using your lamp holder shade ring. Chrome plated top fitting and steel frame.
Dimensions: h=160mm excl. finial, 205mm inc. finial; max w=95mm.
Price: £10.50 each
Ref: SCchrome03
Click image to add to shopping basket
|
New 12cm chrome shade carrier used to carry a glass shade with a 25mm top opening onto a table lamp. To use, unscrew the top filial, place your glass shade on the frame and replace the finial to secure it. Attach to the base using your lamp holder shade ring. Chrome plated top fitting and steel frame.
Dimensions: h=120mm excl. finial, 170mm inc. finial; max w=85mm.
Price: £7.90 each
Ref: SCchrome01
Click image to add to shopping basket
|
New steel shade spring clips, used to hold lamp shades onto a light fitting where the shades have no rim. To use, place
the springs hole over your light fitting 10mm allthread rod and secure with a 10mm entry lamp holder.
You can buy a reducer in this shop to take a 1/2" lampholder down to 10mm. Then squeeze the shade spring inside your glass light shade and let it open to hold the shade.
Dimensions: l=110mm, hole=10mm.
Price: £1.69 each
Ref: SHclip01
Click image to add to shopping basket
|
| |
|
|
|
|
|
